14
4. Assembly Instructions
These installation instructions are intended for persons with skills in electrical and
mechanical areas due to their training, experience and received instructions.
Personnel using these installation instructions must be made aware of the regulations
for the prevention of accidents, the operating conditions and safety regulations and
their implementation.
Ensure in each case that the personnel are sufficiently knowledgeable about the
equipment.
The installation instructions provided in the corresponding operating instructions apply
for all connected equipment.
Please observe all safety regulations for the operation of lifting gear.
All installation work must be carried out with the equipment disconnected from
electrical power and compressed air supply.
For installation work taking place at heights of over approx. 6 feet, use only ladders or
similar equipment and working platforms intended for this purpose. At greater heights,
the proper equipment for protection against falling must be used.
Use only suitable lifting gear that is in proper working order and load suspension
devices with sufficient carrying capacity. Do not stand or work under suspended loads!
Use only suitable workshop equipment.
Install the equipment so that all parts are easily accessible; this facilitates maintenance
and repair work.
