13
3. Transport, Assembly and Storage
This chapter is intended for all operating personnel of the equipment.
Personnel using these instructions must be made aware of the regul5ations for the
prevention of accidents, the operating conditions and safety regulations and their
implementation.
Ensure in each case that the operating personnel are sufficiently informed.
Please inform all persons who may use the equipment of the direct and indirect hazards
associated with the equipment.
Please observe all safety regulations for the operation of lifting equipment.
3.1. Transport and Packing
Please ensure adequate carrying capacity of the lifting equipment.
The unit is delivered as a complete sub-assembly. Transport the unit on a pallet. Lift the unit only
by the mounting flanges on the side of the filter or by the filter chamber. Never lift the filter by
the solenoid or inlet tubes.
The equipment passes rigorous testing in the factory and is packed carefully to avoid transport
damage.
Please check packing on delivery for transport damage. Packing materials should be disposed of
according to environmental laws or reused.
Only use for transport of the equipment a suitable lifting device (e.g. a fork lift truck or a
workshop crane).
Transport must be shock-proofed and free from vibrations.
3.2. Assembly
Please ensure adequate carrying capacity of the lifting equipment.
Check the carrying capacity of the point of installation, particularly if installed on a
platform.
The place selected for installation should be as free of vibrations as possible.
The main power switch must be freely accessible.
Ground the equipment against electrostatic charging.
