A SERVICE OF

logo

12
2.2. For the Operating Safety of the Equipment
Never change settings if the consequences are not precisely known.
Use only original manufacturer-approved spare parts.
Please observe the maintenance schedule.
Keep a record of all maintenance and repair work.
Please note that electronic components may be damaged by static discharge.
Check all electrical connections for proper fit before the equipment is operated for the first time
and at regular intervals.
Please note that the ambient temperature must not exceed 158ºF (70ºC).
The central filter requires a compressed-air supply, max. 60-80 PSI (4.1-5.5 bar).
Never use a higher operating pressure than 80 PSI (5.5 Bar).
Install the central filter in the process suction line right in front of the vacuum pump.
Make sure the filter-cleaning procedure is carried out while the vacuum pump is running.
Follow the operating instructions of the conveying system.
Check the dust container for tightness following each cleaning procedure.
Follow the operating instructions of each connected machine.
All components must be sufficiently grounded.