Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add low foaming, automatic washing machine detergent, then
place a sorted load in the washer before commencing with the cycle. Detergents should
be predissolved when the wash water temperature is less than 40°C.
1. Select a LOAD SIZE
0 Turn the knob to point at a setting
that describes the size of load you
want to wash.
0 Set the knob anywhere on or
between EX SMALL (a few small
items) and EX LARGE (a full load).
level for best permanent press
2.
Select WATER
TEMPERATURES
0 Select wash and rinse water tem-
peratures.
0 This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures can
be found in your “Laundry Guide”.
I
LOAD SIZES AND WATER LEVELS
I
Forbest cleaning results, the load
must be able to move freely in the
CAUTIO -
water.ToobigaloadortooIittlewater
DO NOT
can cause wear or tearina
OVERLOAD WASHER.
of load items.
Approximate
fill with load
EX LARGE 82,i !
MEDIUM 62,l P
EX SMALL 430 P