Sharp HT-CN300W Washer User Manual


 
31
HT-CN300W_A_4.fm02/7/11
HT-CN300W
Advanced Features
- Speaker settings -
Speaker settings (continued)
Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
Note:
Adjust the level of the subwoofer if the sound from it is distorted.
Test tone
You can check the sound output from the speakers. (If the speaker levels are not
equalised, they can be adjusted, too.)
If the levels are not equal:
Whilst the test tone sounds, press the or to adjust the level.
You can select a speaker by pressing the or button.
Note:
If NO (OFF) is selected for a speaker in the speaker size setting, no test tone will be
heard from it.
1
Press the SET UP button.
2
Within 10 seconds, press the or button to select "SP LEVEL",
and press the ENTER button.
3
Within 10 seconds, press the or button to select the desired
speaker.
4
Within 10 seconds, press the or button to adjust the level.
TV screen
z
You can adjust the level at 1 dB intervals.
z
To adjust the levels of other speakers, repeat the operation from step 3.
z
You can complete the setting operation by pressing the SET UP button twice.
Speaker type Adjustable range
FL Front speaker (Left) - 6 dB + 6 dB
CT Centre speaker - 6 dB + 6 dB
FR Front speaker (Right) - 6 dB + 6 dB
SR Surround speaker (Right) - 6 dB + 6 dB
SL Surround speaker (Left) - 6 dB + 6 dB
SW Subwoofer - 10 dB + 10 dB
1
Press the SET UP button.
2
Within 10 seconds, press the or button to select "TONE", and
press the ENTER button.
The test tone will be heard from each speaker, in order, at about 2-second
intervals.
3
To finish checking, press the SET UP button twice.
FL CT FR
SW SL SR