Filter
Top Products
8
TOLL FREE: 1-800-798-7398
6 When the water tank is empty, the
steam mop will stop producing
steam. You can refill the water tank
at any time as long as the mop is
unplugged from the outlet. Follow
the instructions from page 4. This
applies to switching the mop heads
or micro-fiber cleaning pad as well.
NOTE: Please wait 2-3 minutes for
the Steam Mop to cool off before
switching the mop head or the
micro-fiber cleaning pad. Never
leave the steam mop with a damp/
wet micro-fiber cleaning pad on
any floor.
Using Your Steam Mop - cont’d
Using Your Carpet Glider
THE CARPET GLIDER
1 The Carpet Glider can be used with
the All-Purpose Head to lightly steam
your carpet and area rugs. Just
place the mop head with micro-fiber
cleaning pad attached into the glider.
The recommended steam setting is
SCRUB when using the Carpet Glider.
(fig. 13)
2 Move the steam mop back and forth
across a section of the carpet.
(fig. 14)
5 When one side of the micro-fiber
cleaning pad gets dirty, just flip
the mop to use the other side and
continue cleaning with a fresh pad.
(fig. 12)
fig. 12
fig. 13
fig. 14
The Steam Mop won’t clean your
carpeting or area rugs. However, it’s
great for grooming and freshening.