Shark S3901WM Iron User Manual


 
10
TOLL FREE: 1-800-798-7398
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean and
sanitize hard to reach nooks & crannies and other places where germs may build
up. Use the Direct Steam nozzle to loosen and dislodge compact dirt often found
in corners and tight places where traditional methods and cleaning tools tend to
push dirt into, making it tough to reach and clean. Spray direct steam and wipe
clean with a wet cloth or paper towel.
CAUTION: Do not press steam
trigger until the Direct Steam Nozzle
is snapped into the main nozzle of
your Handheld Steamer.
4 To remove the Direct Steam Nozzle,
press and hold down the steam unit
lock buttons. Then slide out the
Direct Steam Nozzle using the grips.
CAUTION: Do not press steam
trigger while removing the Direct
Steam Nozzle. Avoid touching the tip
of the Direct Steam Nozzle, as this
will be very hot after steaming.
2 To activate steam, first attach the
Direct Steam Nozzle to the Handheld
Steamer by snapping the Direct
Steam Nozzle into the main nozzle.
(fig. 16)
3 Then press and hold the steam
trigger button to start steaming.
While the steam trigger button is
pressed and held down, the
ON/STANDBY button light will be
solid blue. When released, the
ON/STANDBY button light will return
to flashing blue. (fig. 17)
fig. 16
fig. 17
Using Your Handheld Steamer
with Direct Steam Nozzle