Filter
Top Products
Select the Timer (if required)
You can use the timer to set the end time of a programme.
The start of a programme can be delayed from 30 minutes
up to a maximum of 24 hours, allowing you to make use of
night-time economy electricity rates, for example.
^
Press short cut button 2 to open the Timer sub-menu.
Cottons 60°C 1600 rpm
Extras: None
15:03
Start at:
15:03
Finish:
15:30
^ Use the multi-function selector to select the programme
end time (when the first 30 minute stage is entered, the
programme end time will be adjusted to the next full or half
hour). Confirm your selection. The start of the programme
will now be delayed in parallel with the programme end
time you have selected.
To start the timer
^ Press the Start button.
The delay start time will be shown counting down in minutes.
To cancel the timer
^
Press short cut button 4.
The actual load size can only be determined accurately by
the machine once the programme has started. The
programme end time may, therefore, be a bit later or
earlier than first indicated.
How to wash correctly
21