Filter
Top Products
Final spin speed
Programme rpm
Cottons 1800
Minimum iron 1200
Delicates 600
Automatic 1200
Dark garments 1200
Shirts 600
Denim 900
Express 1600
Woollens 1200
Silks 400
Sportswear 1200
Outerwear 800
Hygiene 1800
First wash 1200
Proofing 1000
Curtains 600
Pillows 1200
Starch 1500
Separate rinse 1200
Drain/Spin 1800
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select Rinse hold from the Extras
sub-menu. The laundry will not be
spun and will remain suspended in
the final rinse water. This reduces
creasing if the laundry is not going to
be removed from the drum immedi
-
ately after the end of the programme.
–
To start the final spin
:
Whilst the spin speed is highlighted,
press the multi-function selector.
Select a different spin speed, if
necessary, by turning the
multi-function selector. Press the
Start button to begin the final spin.
– To end the programme
:
Press the / button. The water will
drain away. Press the / button
again, to open the door.
To omit the spin between rinses and
the final spin
^
Select Without spin from the Spin
speed sub-menu . The laundry is not
spun after the final rinse. The water
will drain away and the machine will
go straight into the anti-crease stage.
An additional rinse is introduced if
this setting is selected with the
Cottons, Minimum iron, Automatic
and Express programmes.
Spinning
25