Filter
Top Products
Start the programme
^
Press the flashing Start button.
The estimated programme duration and
the programme sequence will appear in
the display. During the first 10 minutes
the machine measures how much water
is being absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The drum lighting switches off once the
programme has started.
Once washing is in progress, you can
press the following short cut buttons:
– Button
2 Timer +: to call up the
current time of day and the estimated
end time of the programme.
– Button
3 Save: to save the current
programme as a favourite.
– Button
4 Cancel: to cancel the
current programme. The suds are
pumped away immediately.
Remove the laundry when the
programme has finished
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
Anti-crease
and
Programme finished
Unload the drum before switching off
^
Press the / button to open the drum
door.
The washing machine will switch off
automatically 15 minutes after the
end of the anti-crease phase. You will
need to press the K button to switch
it back on again.
^
Remove the laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
^ Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Important
Always remove the laundry before
switching the machine off. This is
important to ensure that the load size
indicator works correctly.
^
Switch the machine off with the
K button.
To avoid the build-up of mildew, it is
recommended that the door is left
ajar when the machine is not in use.
How to wash correctly
23