Filter
Top Products
Memory function
If an Extra(s) is selected for a
programme, and / or the spin speed
is altered, the machine stores these
changes in memory at the start of a
programme.
When that particular programme is
chosen again, the display will show the
Extra(s) and / or spin speed which have
been stored for that programme in the
memory.
The washing machine is delivered with
the memory function deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that
:
– The washing machine is switched off.
– The drum door is properly closed.
A Press the
Start/Stop
button and keep
it pressed in whilst carrying out steps
B - C.
B Press the
I-On/0-Off
button in.
C Wait until the indicator light for the
Start/Stop
button comes on . . .
D . . . and then release the
Start/Stop
button.
E Press the
Buzzer
button six times.
–
The
Buzzer
indicator light will flash
seven times.
A P will flash in the display alternating
with the number 0 or 1.
0 = the memory function is
deactivated.
1 = the memory function is
activated.
F Pressing the
Start/Stop
button will
change the display message from 0
to 1 (activated) or from 1 to 0
(deactivated).
G Switch the machine off with the
I-On/0-Off
button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
64