Filter
Top Products
Water plus system
This setting is used to select the
water intake setting for the
Water plus
EXTRA.
There are three different options:
Setting 1
(the machine is delivered with
this option selected)
The water intake is increased in the
wash and rinse stages of the
programmes.
Setting 2:
An additional rinse is introduced in the
Cottons
,
Minimum iron
,
Automatic
,
Quick wash
and
Silks
programmes.
Setting 3:
The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced in the
Cottons
,
Minimum iron
,
Automatic
,
Quick wash
and
Silks
programmes.
Follow steps A to F to programme
and store in memory.
Before you begin, first ensure that
:
–
The washing machine is switched off.
–
The machine is properly closed.
A Press the
Start/Stop
button and keep
it pressed in whilst carrying out steps
B - C.
B Press the
I-On/0-Off
button in.
C Wait until the indicator light for the
Start/Stop
button comes on . . .
D . . . and then release the
Start/Stop
button.
–
The
Buzzer
indicator light will flash
on and off once.
–
A P will flash in the display
alternating with the number 1, 2 or 3.
E Each subsequent pressing of the
Start/Stop
button will select a
different setting.
The number alternating with the P in the
display refers to the settings as follows:
1 = Setting 1
is selected
2 = Setting 2
is selected
3 = Setting 3
is selected
F Switch the washing machine off with
the
I-On/0-Off
button.
The
Water plus
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
58