Filter
Top Products
Soak
A length of time of between 30 minutes
and 2 hours can be programmed in 30
minute increments for the soak
process.
If the Soak Extra is selected, the
laundry will be soaked for the soak time
which has been programmed in before
the wash programme is run.
The machine is delivered with a two
hour soak time set as standard.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that
:
– The washing machine is switched off.
– The drum door is properly closed.
A Press the
Start/Stop
button and keep
it pressed in whilst carrying out steps
B -C.
B Press the
I-On/0-Off
button in.
C Wait until the indicator light for the
Start/Stop
button comes on . . .
D . . . and then release the
Start/Stop
button.
E Press the
Buzzer
button three times.
–
The
Buzzer
indicator light will flash
four times.
–
A P will flash in the display
alternating with the number 1, 2, 3 or
4.
F Each subsequent pressing of the
Start/Stop
button will select a
different setting.
The number alternating with the P in the
display refers to the settings as follows:
1 = the soak time is 2 hours
(default setting)
2 = the soak time is 1 hour 30 minutes
3 = the soak time is 1 hour
4 = the soak time is 30 minutes
G Switch the machine off with the
I-On/0-Off
button.
The
Soak
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
61