Filter
Top Products
Cleaning the spray arms
Waste particles can lodge in the spray
arm jets.
It is therefore important to inspect the
spray arms regularly.
^
Use a sharp pointed object to push
particles into the spray arm jets, and
rinse well under running water.
Remove the spray arms as follows:
^
Take any mobile units out of the wash
cabinet.
Spray arms in the wash cabinet:
^
Loosen the securing clip on the spray
arm connection and then pull the
spray arm upwards or downwards.
^ Remove the seal and the bearing and
clean them.
^ Refit the bearing and the seal.
Spray arms in mobile units/modules:
^ Turn the nut (left hand thread)
together with the spray arm
clockwise and then pull the spray
arm downwards and off.
^
After cleaning the spray arms screw
them back into position.
^
After replacing the spray arms, check
that they rotate freely.
Maintenance
53