Filter
Top Products
~
Take care when handling chemical
agents such as cleaning agent,
neutralising agent, rinsing agent etc.
These may contain irritant or corrosive
ingredients.
Please follow the manufacturer's safety
instructions. Wear protective gloves
and goggles. With all chemical agents,
the manufacturer's safety instructions
and safety data sheets must be
observed.
~
The machine is designed for
operation with water and recommended
additive chemical agents only. Organic
solvents and flammable liquid agents
must not be used in this machine.
These could cause an explosion,
damage rubber and plastic
components in the machine, and cause
liquids to leak out of the machine.
~
The water in the cabinet must not be
used as drinking water.
~
Be careful when sorting items with
sharp pointed ends and positioning
them in the machine that you do not
hurt yourself or create a danger for
others. Sharp knives etc. should be
placed in baskets with the pointed ends
facing downwards.
~
When using this machine in the
higher temperature ranges, be
especially careful not to scald or burn
yourself or come into contact with
irritant substances when opening the
door. Where disinfecting agents are
used there is a danger of inhaling toxic
fumes.
~
Where there is a risk of toxic or
chemical substances occuring in the
suds solution (e.g. aldehyde in the
disinfecting agent), it is essential to
regularly check door seals and make
sure that the steam condensor is
functioning correctly.
Opening the machine door during a
programme interruption carries
particular risks in such circumstances.
~
Should personnel accidentally come
into contact with toxic vapours or
chemical agents, follow the emergency
instructions given in the manufacturer's
safety data sheets.
~
Mobile units, modules, inserts and
the load must be allowed to cool down
before they are unloaded. Any water
remaining in containers could still be
very hot. Empty them into the wash
cabinet before taking them out.
~
After using the hot air drying unit,
open the door to allow the everything in
the cabinet from the load itself to the
mobile units, modules and inserts to
cool down.
~
Steam heating is permissible up to a
pressure of 1000 kPa (10 bar). This
corresponds to a water steam
temperature of 179°C.
~
Never clean the machine or near
vicinity with a water hose or a pressure
washer.
~
The machine must be disconnected
from the mains electricity supply before
any maintenance or repair work is
carried out. Do not reconnect it until the
maintenance or repair work has been
successfully completed.
Warning and safety instructions
5