Filter
Top Products
^
Set the programme place coding.
^
Put the magnetic strip back in the
track.
The magnetic strip must be placed
in the track such that the Bit coding
set out in the chart is visible through
the round windows in the track.
^
Place the track in the holder in the
mobile unit and screw firmly in place.
Bit 6 (WAK) is not a component part
of the modifiable magnetic strip.
Make sure that you code mobile
units with side connection with a
track where Bit 6 is set to I.
Mobile units without side coupling
must be coded with a track without
Bit 6.
The magnetic strips on G 7823 /
G 7824 / G 7825 / G 7826 must have
grey magnets.
The magnetic strips on G 7827 /
G 7828 must have black magnets.
Automatic mobile unit recognition (Optional)
22