Filter
Top Products
Each machine is supplied witha5m
long interface cable for data transfer
between the Profitronic system and an
external report printer or PC.
The interface cable is rolled up
inside the machine and must only be
connected by an authorised Service
Dealer or the Miele Service Dept.
The serial interface is RS 232
compatible.
For the interface configurations see
"PC/Printer Function" in the
Programming manual.
Various printers can be used as
external printers:
– Epson-compatible
(contact Miele for a list of suitable
models).
– HP Laserjet.
Pin configuration in the 9-pole sub-D
connector on the interface cable:
5 GND (base)
3 TXD (transmit)
2 RXD (receive)
1-4-6 (linked)
7-8 (linked)
A standard null-modem or laplink cable
can be connected.
The extension cable to the printer/PC
must not exceed 10 m in length.
Please note the following when
connecting a printer or PC:
–
Only use an industry-standard PC or
printer (e.g. in Germany TÜV, or VDE
approved).
–
The size of the printer or PC
must be taken into account when
installing the machine.
The report printer settings are
described in detail in the Programming
manual under "PC/Printer function".
Data transfer
48