Filter
Top Products
Baby bottles (BC)
Baby bottles can be processed in
E 135 containers, wide-necked teats in
an E 364 insert and screw connection
teats in an E 458 insert.
–
Ensure the level marker on the
bottles is machine-washable.
–
If there is a delay of 4 hours or more
before bottles can be washed, fill
them with water to prevent residues
from drying on.
If the process is not to be followed
by sterilisation, the load should be
dried completely to avoid the
development of water-borne
bacteria.
A sufficient drying time is therefore
absolutely essential.
Inserts for baby bottles and teats are
supplied with their own operating
instructions.
Loading in an E 555
Bottom level with3xE135
Top level with2xE135
Areas of application
28