Miele 09 845 470 Washer User Manual


 
Cleaning and care
73
Cleaning the water inlet filter
The washing machine has a filter to
protect the water inlet valve. The acces‐
sible filter in the union at the open end
of the inlet hose should be checked ev‐
ery six months or so, or more often if
there are frequent interruptions to the
water supply.
First turn off the stopcock.
Unscrew the inlet hose from the stop‐
cock.
Remove the rubber seal 1 from the
recess.
Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
Clean the plastic filter.
Put the filter and seal back in the re‐
verse order and reconnect the hose.
Turn on the stopcock and check the
connection is watertight. If water
drips out, tighten the connection.
The filter must be put back in place
after cleaning.