Filter
Top Products
Before using for the first time
18
This washing machine has undergone
a complete functional test at the fac‐
tory and there will be some residual
water in the drum from this process.
For safety reasons, spinning is not pos‐
sible until the machine has been pre‐
pared for using for the first time. To ac‐
tivate the spinning function you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an ex‐
cessive build-up of foam.
Press the button in.
The welcome screen will light up.
Setting the language
You will be asked to select the lan‐
guage you want for the display. It is
possible to change the language at any
time via the Settings menu.
Sprache
deutsch
english (AUS)
english (GB)
Touch the or sensor until the
language you want is highlighted in
white.
Confirm your selection of the lan‐
guage by touching the OK sensor.
Setting the time of day (if re‐
quired)
The display for setting the time will then
appear. First you have to select the
clock format.
Clock format
24 h clock
12 h clock
Touch the sensor if you would like
a 12 hour clock display.
Confirm your choice for the clock for‐
mat with the OK sensor.
The display will switch automatically to
the time of day selection.
Time of day
00 : 00
Touch the sensor to decrease or
the sensor to increase the hour.
Confirm the hour selected with the
OK sensor. Then set the minutes in
the same way.
Tip: If you have selected the 12 hour
clock format you can then select am or
pm.