Filter
Top Products
Options
55
Steam smoothing
Steam is injected into the drum at the
end of the wash process. Reducing the
maximum load by 50% will give a bet‐
ter result. For steam smoothing to work
properly there needs to be a certain
amount of residual moisture still present
in the laundry and so the final spin
speed is adjusted accordingly.
The garments must be suitable for dry‐
ing in a tumble dryer and suitable
for ironing .
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
Stains
In order to clean stained laundry more
effectively you can choose from a list of
various types of stains. The wash pro‐
gramme will then adapt to the types of
stains selected. You can select a maxi‐
mum of three stains per wash cycle.
Further options
Soak
For heavily soiled and stained items
with protein stains.
A duration of between 30 minutes and 5
hours in 30 minute increments can be
chosen for the soak process. See "Set‐
tings" for more information.
The factory default setting is 30 mi‐
nutes.
Water plus
The water level in the wash and rinse
stages is increased.
You can select by how much the water
level is increased, see "Settings, Water
plus level".
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Extra rinse
An additional rinse cycle is carried out
to give a better rinse result.
Rinse hold
The laundry is not spun after the final
rinse and remains in the final rinse wa‐
ter. This helps prevent creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.