Filter
Top Products
Changing the programme sequence
62
Cancelling a programme
You can cancel a programme at any
time after it has started:
Press the Start/Stop button.
The following will appear in the display:
Selection
Cancel programme
Add laundry
Activate safety lock
Touch the OK sensor.
The suds will be pumped away. The fol‐
lowing will appear in the display:
Cottons
10:30
1600 rpm
Programme cancelled
Pull open the door.
Remove the laundry.
If you want to select a different pro‐
gramme
Close the door.
Select the programme you want.
Add detergent to the detergent dis‐
penser drawer, if necessary.
Press the Start/Stop button.
The new programme will begin.
Interrupting a programme
Switch the washing machine off with
the button.
Switch the washing machine back on
with the button to continue with
the same programme.
Changing a programme
After the start of a programme it is no
longer possible to select a different pro‐
gramme.
Temperature
With the exception of the Cottons pro‐
gramme, it is possible to select a differ‐
ent temperature up to 5 minutes after
the programme has started.
Press the Temperature button.
Use the , and OK sensors to
change the temperature.
Spin speed
It is possible to change the spin speed
up until the final spin begins.
Press the Spin speed button.
Use the , and OK sensors to
change the spin speed.
Options
It is possible to select or deselect the
Short and Water plus options up to 5
minutes after the programme has star‐
ted.
Tip: It is not possible to make any
changes to the programme or to cancel
it if the safety lock has been activated.