Cleaning and care
38
Emptying the condensed water
container
The condensed water is collected in
the condensed water container.
Empty the condensed water contain‐
er after every drying programme.
Empty container will light up if the
maximum level of the condensed water
container is reached.
To delete Empty container: open and
close the door with the dryer switched
on.
To prevent damaging the door
and the front of the condensed water
container when pulling the container
out of the dryer:
always close the door completely.
Pull out the condensed water con‐
tainer.
To prevent water running out, hold it
at the front and towards the back and
keep it in a horizontal position when
carrying it.
Empty the container.
Replace the container in the dryer.
Condensed water should not be
consumed. It could lead to health
problems for people and animals.
The condensed water can be used for
the Steam smoothing programme. The
condensed water container must be fil‐
led to use this programme, see the fol‐
lowing section.