Filter
Top Products
Settings menu
72
Buzzer volume
The buzzer can be set to be louder or
quieter.
The setting selected is shown in a bar
chart.
Factory default: a medium setting.
– Quieter
– Louder
You will hear the buzzer change as the
setting is selected.
Keypad tone
When this function is activated a tone
will sound each time a button is press‐
ed.
Options
– On
– Off (factory default)
Conductivity
The Low option should only be
selected if the residual moisture
reading in your laundry is incorrect
due to extremely soft water.
Options
– Normal (factory default)
– Low
Conditions
The Low option should only be set if the
water used for washing the laundry is
extremely soft with a conductivity read‐
ing (electrical conductivity) of less than
150 μS. Contact your local water au‐
thority for the conductivity level of your
mains water supply.
Only activate the Low option for
the conditions described above.
Otherwise drying results can be un‐
satisfactory.
Total consumption
You can display the total consump‐
tion.
Options
– Display
The total consumption is displayed in
kWh.
– Reset function
The total consumption to date will be
deleted with the Reset option.