Filter
Top Products
Cleaning and care
43
Cleaning the plinth filter panel
Use a damp cloth to remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
Check whether the cooling fins are
blocked with fluff (as follows).
Checking the condenser unit
Danger of injury. Do not touch
the cooling fins. You could cut your‐
self.
Look to see if fluff has accumulated.
If there is visible soiling:
Clean using a vacuum cleaner
with a dusting brush attached. Care‐
fully pass the vacuum cleaner brush
over the heat exchanger cooling fins
without applying any pressure. Oth‐
erwise the cooling fins could be bent
out of shape or become damaged.
Carefully vacuum up any visible fluff
or soiling.