Filter
Top Products
Changing the programme sequence
37
You cannot change to another pro‐
gramme once a programme has started
(this prevents unintentional alterations).
If you move the programme selector,
Change not possible will light up in the
display until you move the programme
selector back to the original pro‐
gramme.
You will need to cancel the current pro‐
gramme before you can select a new
one.
Cancelling a programme while
it is running and selecting a
new programme
Press the Start/Stop button.
Cancel programme will light up in the
display.
Confirm by touching the OK sensor.
– Cooling down will light up in the dis‐
play, depending on the drying dura‐
tion and the drying temperature
reached.
– Wait until Finish lights up in the dis‐
play or press the Start/Stop button
again until Finish lights up.
Press the button to switch the dry‐
er off.
Press the button to switch the dry‐
er on.
Select and start a new programme
straight away.
Adding or removing laundry af‐
ter a programme has started
Press the Start/Stop button.
Cancel programme will light up in the
display.
Confirm by touching the OK sensor.
– Cooling down will light up in the dis‐
play, depending on the drying dura‐
tion and the drying temperature
reached.
– Wait until Finish lights up in the dis‐
play or press the Start/Stop button
again until Finish lights up.
Danger of burning.
Do not touch the back of the drum
when adding or removing items. The
drum and the items can be very hot.
Add or remove items.
Close the door.
To continue with the programme:
(change the drying level first of all, if
necessary)
Press the Start/Stop button.
Programme duration
Altering the programme sequence can
cause the programme duration shown
in the display to be adjusted.