Filter
Top Products
Problem solving guide
50
With the help of the following notes minor faults in the performance of the appli‐
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
Repair work to electrical appliances must only be carried out by a suitably
qualified person in strict accordance with current local and national safety regu‐
lations. Repairs and other work by unqualified persons could be dangerous.
The manufacturer cannot be held liable for unauthorised work.
Some of the messages in the display are more than one line long. Touch the or
sensor to read them in full.
Messages in the display
Problem Cause and remedy
lights up after
switching on
Access via a code has been activated.
See "Settings menu, Code".
Adjust the load See
lights up after a pro‐
gramme is cancelled
This is not a fault.
In some programmes, if the drum has been underloa‐
ded or is empty, the programme will be cancelled.
This can also happen if the items are already dry.
Open and close the door to resume drying.
Dry individual items using the Warm air timed dry‐
ing programme.
Service Fault F
lights up after a pro‐
gramme is cancelled
No obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact the Miele
Service Department.