Filter
Top Products
4
MFS18 MFS25 MFS35 MFS55
P
0.6" (15 mm) 0.6" (15 mm) 0.8" (20 mm) 0.8" (20 mm)
* Door may not open completely with this minimum clearance
Product Dimensions
General product dimensions are shown below. See Technical
Specications for dimensions not shown here.
Installation on an elevated base
NOTES:
■ Models MFS35 and MFS55 are mountable on either a metal
base or an elevated cement slab; however, they must be
adequately secured.
■ Minimum clearances should be maintained when installing
washers in an elevated position.
Fixed Installation on Concrete Floor or Elevated
Concrete Pad (all models)
All washer models can be installed on an elevated cement slab.
The base must be able to withstand both the load and vibration
of the washer. The washer must be secured with anchor bolts
(See “Installation Instructions”). Install the 4 anchors before nal
installation of the washer.
Freestanding Installation on Elevated Concrete Pad
(Models MFS18 and MFS25 only)
Models MFS18 and MFS25 can be installed on an elevated
concrete pad without bolts by installing a metal channel at the
front of the concrete pad to secure the front washer mounting
feet. Specications of the metal channel are shown in the gure
below. The channel must be rmly secured with anchors or
self-tapping cement screws.
PP
27.6" (701 mm)
23.6" (600 mm)
Front View
4" (100 mm)
Side View
C
A
B
D
12"
(300 mm)
max. elevation
0.63"
(15 mm)
0.160"
(4 mm)
min.
12"
(300 mm)
max.
2.38"
(60 mm)
MFS18 MFS25 MFS35 MFS55
A 25.99"
(660 mm)
25.99"
(660 mm)
32.67"
(830 mm)
35.46"
(901 mm)
B
28.15"
(715 mm)
32.48"
(825 mm)
38.39"
(975 mm)
36.40"
(925 mm)
C
42.50"
(1080 mm)
44.90"
(1140 mm)
51.00"
(1300 mm)
56.30"
(1430 mm)
D
44.50"
(1130 mm)
48.40"
(1230 mm)
58.70"
(1490 mm)
63.60"
(1620 mm)
Dim. Model