Filter
Top Products
16
08/2012
Printed in the Czech Republic
Technical Specifications
MFS18 MFS25 MFS35 MFS55
Dimensions and Weights
Washer dimensions
(width x depth x height)
25.99 x 28.15 x 42.50"
(660 x 715 x 1080 mm)
25.99 x 32.48 x 44.90"
(660 x 825 x 1140 mm)
32.67 x 38.39 x 51.00"
(830 x 975 x 1295 mm)
35.46 x 36.40 x 56.50"
(901 x 925 x 1435 mm)
Net weight 519 lb. (235 kg.) 607 lb. (275 kg.) 1026 lb. (465 kg.) 1433 lb. (650 kg.)
Package dimensions 29.50 x 33.50 x 49.30"
(750 x 850 x 1250 mm)
29.50 x 37.40 x 51.20"
(750 x 950 x 1300 mm)
36.60 x 44.90 x 59.50"
(930 x 1140 x 1510 mm)
38.40 x 47.30 x 63.80"
(975 x 1200 x 1620 mm)
Gross weight 552 lb. (250 kg.) 662 lb. (300 kg.) 1092 lb. (495 kg.) 1522 lb. (690 kg.)
Transportation volume 27.9 cu.ft. (0.8 m
3
) 32.5 cu.ft. (0.9 m
3
) 56.5 cu.ft. (1.6 m
3
) 67.1 cu.ft. (1.9 m
3
)
Electrical Requirements
Supply Voltage (50/60 Hz) 208–240V 1-phase* 208–240V 3-phase
Fuse/Breaker Type Slow (curve D)
GFCI** Class B
Water Supply Requirements
Allowable water pressure 14.5–116 psi (100–800 KPa)
Recommended pressure 43–73 psi (300–500 KPa)
Water inlet BSP 3/4"
Maximum water temperature 194°F (90°C)
Drain Requirements
Drain diameter 3" (76 mm)
Flow rate 56 GPM (3.5 l/s)
Environmental Requirements
Operating temperature 41 to 95 °F (5 to 35°C)
Relative humidity 30 to 90 % without condensation
Elevation above sea level Up to 3280 ft. (1,000 m)
Storage temperature 32 to 131°F (0 to 55°C)
Floor Requirements
Maximum static load 560 lb. (2492 N) 675 lb. (3002 N) 1225 lb. (5450 N) 1770 lb. (7860 N)
Maximum dynamic load 164 lb. (730 N) 248 lb ( 1100 N) 275 lb. (1220 N) 366 lb. (1626 N)
Dynamic frequency 16 Hz 16 Hz 16 Hz 15 Hz
Noise
Noise output <70 dB(A) <70 dB(A) <70 dB(A) <70 dB(A)
Steam Connection
G 1/2"
Low pressure 14.5–44 PSI
(100–303 KPa)
High pressure 44–116 PSI
(303–800 KPa)
* 2 phases of a 3-phase power supply may be used. See “Electrical Requirements”.
** Consult an electrician to ensure proper GFCI connection.
Torque Specifications
Recommended Torque Values for Steel Bolts
Bolt Size Torque
M6 8 ft. lbs. (10 Nm)
M8 20 ft. lbs. (25 Nm)
M10 35 ft. lbs. (45 Nm)
M12 60 ft. lbs. (80 Nm)
M16 150 ft. lbs. (200 Nm)
© 2012 Maytag. All rights reserved.
W10214572C