Filter
Top Products
A. SELECT LOCATION
FOR YOUR DRYER
Selecting the proper location
for your dryer makes installation
easier and gives you the best
drying performance.
STANDARD INSTALLATION
Check location where dryer will be installed.
Proper installation is your responsibility.
Make sure you have everything necessary
for correct installation including proper
floor support, a level floor, and a separate
30-amp. fuse.
* Protect dryer from the weather. Proper
operation of dryer cycles requires
temperatures above 45°F. At lower
temperatures, the dryer may not shut
cff at the end of automatic cycles.
Drying times will be extended.
Explosion Hazard
Keep flammable materials and vapors,
such as gasoline, away from dryer.
Place dryer at least 18 inches above
the floor for a garage installation.
Failure to follow these instructions
can result in death, explosion, or fire.
• Check code requirements. Some
codes limit or do not permit installation
of clothes dryers in garages, closets,
mobile homes, or sleeping quarters.
Contact your local building inspector.
Separate
30-amp. fuse.
Grounded receptacle:
Within 2 feet of either
side of dryer.
Support: Floor must be
sturdy enough to support
a total weight of 175
pounds (includes dryer
and load weight).
y
Level floor: Maximum
allowable slope under entire
dryer- 1 inch.