Filter
Top Products
1. Take out drawer containing water
reservoir completely 1 and pull up the
water reservoir's drainage pipe as far as it
will go 2.
1.
2.
2. Pour the condensed water out into a basin
or similar receptacle.
3. Slide the outlet connections in and refit
the water reservoir.
If the programme has been interrupted as
a result of the water reservoir being full:
Press the Start/Pause button to continue
the drying cycle.
The water reservoir has a volume of
approx. 4 litres. This is sufficient for
around 7 kg of laundry which has
previously been spun at 1000
revolutions / minute.
The condensed water can be used as
distilled water, e.g. for steam ironing.
However it must first be filtered (e.g.
with a coffee filter) to remove any
residue and small pieces of fluff.
Cleaning heat exchanger
filter
If the warning lamp Condenser lights, the heat
exchanger filter in the base of the appliance
must be cleaned.
To protect the heat pump from dirt,
the dryer is fitted with a fluff filter,
which is located in the filter housing.
Here, too large amounts of fluff build
up over time, which affect the function
of the appliance.
Important!
• Operating when the fluff filter is clogged
with fluff can damage the dryer. This also
increases energy consumption.
• Never operate the dryer without the fluff
filters.
1. Open door in plinth: To do this, press the
release button on the right and open the
door in the plinth to the left.
18