Filter
Top Products
To deselect the function press the Intensive
button again. The LED above is off.
Long anti-crease
This function prolongs the anti-crease phase
to 90 mins in total. The drum rotates in
intervals during this phase. The laundry
therefore remains relaxed and free of creases.
To activate it:
1. Choose the drying programme.
2. Press the Long anti-crease button - the LED
above is on.
If this additional function is selected, the anti-
crease phase at the end of the drying cycle is
lengthened by 60 minutes. The laundry can be
removed at any time during the anti-crease
phase.
To deselect the function press the Long anti-
crease button again. The LED above is off.
Press the Long anti-crease button. A 90 minute
anti-crease phase is set. The display now
shows the Long anti-crease icon. If this
additional function is selected, the anti-crease
phase at the end of the drying cycle is
lengthened by 60 minutes. The laundry can be
removed at any time during the anti-crease
phase.
Alarm
The appliance is supplied with the Alarm
function deactivated.
When activated, the buzzer sounds:
– At the end of the cycle
– When the anti-crease phase starts or ends
– When the cycle is interrupted
To activate it:
1. Choose the drying programme.
2. Press the Alarm button - the LED above is
on.
To deselect the function press the Alarm
button again. The LED above is off.
Time
Use the Time button to select the programme
duration after setting the Time programme.
You can select a programme duration from 10
mins to 2 hrs in 10-minute steps.
1. Turn the programme selector to the
Time programme. The flashing 10' above
the Time button is on.
2. Press the Time button repeatedly until the
desired programme duration is shown in
the display, e.g. 20 for a programme of 20
minutes.
If the programme duration is not selected, the
duration is automatically set to 10 mins.
13