Filter
Top Products
49
Automatic power OFF
The power will be cut automatically at the end of operation.
The power will be automatically cut if the washing machine keeps one of the following status for above 1 hour.
1
1) Pause
2) Lid open
3) Abnormality alarm describer in page 46
46
With no pressing on "START/PAUSE" button in 5 minutes after the power on, the power will be cut automatically.
5
The following cases are not the failures
Supply water during the course
of washing.
The water can no be charged
when starting washing form rinse.
After connecting the water supply
pipe, water will come in from the
water supply opening if turning
on the tap.
The pulsator stop rotating during
the charging for about 1 minutes.
1
The rotary water supply takes a
longer time.
"Rustle" happens as rotating the
washing basket by hand.
It sounds "Karcha" at the beginning
of washing or spinning.
It buzzes during the operation.
• Supply water automatically if the water level drops during the
course of washing.
• The rinse water can only be charged after drainage and spinning.
• With the application of decompression valve, the close of valve
needs certain duration.
• It may be influenced by outside interference, and it takes some
time for the sensor to detect the interference.
• As the water level of washing machine is too low.
• The sound comes from the water flow in the liquid balance used
to relieve the spinning vibration.
• That is generated during the mode switch of the clutch. (the
strength of the sound varies with the sound duration.)
• That is the electromagnetic sound of the motor switched on and
off.
About
the water
charging
About
the
sound
Case Cause