Filter
Top Products
33
Using the Washing Cap
Make sure the washing cap is used in "WOOL" or "BLANKET" process. The washing cap is the optional part.
Installation of the washing cap
Bend the cap as is shown in the figure and then
put it in the basket with the side with letter faced
up.
1
1Press the washing cap on your side, squeeze
the whole cap into the basket.
2Press hard the whole washing cap down and
flatten it up.
2
Fit the concave of the
washing cap into the
convexity of the basket
and flatten it up.
washing cap
Basket
Push down the cover
close to your body.
Push down the
whole cover
2
Attention
• Please install the washing cap in right way to avoid unnecessary injury.
Adjustment of the position and height of the washing cap
• The installation position (height) of the basket shall be determined by the type, size, and thickness of the
washings. Please install the washing cap at a height where it could press against the washings slightly.
( )
• There is a sign of protrusion on the interior wall of the basket, indicating where the installation position shall
be, which can be used as reference at the time of installation.
•
For light and thin clothes such as blouse, towels can be put into the basket to adjust the height of the washings and avoid
oblique of the washing.
In "WOOL" process
washing cap
Washing waterline washing capacity
35L 25L
less than 1.2kg
1.2kg
Attention
• Do not add any clothes on the washing cap after the installation of the cap.