Filter
Top Products
11
Installation of the bottom plate
How to Install the Water Supply Hose
The bottom plate is placed on the packaging foam
on the top of the washer.
Firmly tighten the union nut when
connecting the water supply
hose to the main unit.
• Loosely tightened union nut will cause water leakage.
• When removing the hose, unscrew the union nut first.
Please use optional extension tube for
lengthening the water supply hose.
• Three standard of extension hoses (1m,2m,3m)
are available. Please inquire distributors for
extending the water supply hose.
1m 2m 3m
Union nut
Connecting the water supply hose to the main unit
Extended the water supply hose
1
Please place the washer transversely in a
slight way.
• Before placing the washer transversely, lay some soft
paper pad on the ground to avoid damage to the
body.
2
Align the hook on the bottom plate with
the square hole on the chassis and insert
it, then tighten the screw.
Corrugate paper etc.