Bosch Appliances WTL 5410 Clothes Dryer User Manual


 
5
IMPORTANT SAFETY INSTRUCTIONS (continued)
21. Replace worn power cords and/or loose plugs.
22. Do not operate the dryer with any guards and/or
panels removed.
23. Do not operate the dryer with missing or broken
parts.
24. Do not bypass any safety devices.
25. Do not use plastic or non-metal flexible duct with this
dryer. Plastic or non-metal flexible duct presents
a potential fire hazard.
26. Do not operate this dryer until you are sure the dryer
has been installed according to the INSTALLATION
INSTRUCTIONS and installation and grounding are
in compliance with all local codes and/or other
applicable codes and requirements.
27. Failure to install, maintain and/or operate the dryer
according to the manufacturer’s instructions may
result in conditions which can lead to bodily injury
and/or property damage.
Notes: A The IMPORTANT SAFEGUARDS and WARNINGS presented in this manual do not cover all
possible conditions that may occur. Common sense, caution and care must be exercised when
installing, maintaining or operating the dryer.
B Always contact your dealer, distributor, service agent or the manufacturer about any problems or
conditions that you do not understand.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance
for the electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and
a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
WARNING – Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you
are in doubt as to whether the dryer is properly
grounded.
DO NOT modify the plug provided with the appliance –
if it will not fit the outlet have a proper outlet installed
by a qualified electrician or exchange the cord with
an appropriate one rated for the dryer.