Filter
Top Products
12
Moisture Sensor
Occasionally the moisture sensors will need cleaning,
due to a build-up of a fine layer of lime scale on the
inside of the drum. This build-up of lime scale can be
easily removed by wiping the sensors, the metal inserts
in the paddles, and the inside of the drum with a soft
cloth soaked in vinegar (use white vinegar).
See Figure 10.
Figure 10.
Frost Protection (WTL models only)
The WTL models, since they remove moisture by
condensing the water out of the air and then pumping
the water to drain, should never be installed in an area
subject to freezing. Also, if the dryer is to be transported
where it would be subjected to freezing the dryer must
be completely emptied of water before transporting.
SERVICE and REPAIR
The Bosch dryers require no special care other than the
care and cleaning noted above. If you are having
a problem with your dryer, before calling for service
please refer to Table 2, SELF-HELP section, following.
If service becomes necessary, contact your dealer or
installer or an authorized service center. Do not attempt
to repair the appliance yourself. Any work performed by
unauthorized personnel may void the warranty.
If you are having a problem with your Bosch dryer and
are not pleased with the service you have received:
l First, please contact your installer or the Bosch
Authorized Service Contractor in your area and
explain to them why you are not satisfied. This will
usually correct the problem.
l If after working with your installer or service person
the problem still has not been resolved to your
satisfaction, please let us know by either writing to
us at,
BSH Home Appliances
5551 Mc Fadden Avenue
Huntington Beach, CA 92649
or, calling us at,
1-800/944-2904.
Please be sure to include, if writing, or have available,
if calling, the following information:
l Model Number
l Serial Number
l Date of Original Purchase
l Date Problem Originated
l Explanation of Problem
Also, if writing, please be sure to include a daytime
telephone number and a copy of the sales invoice.
You will find the model number and serial number
information on the rating plate located on the inside of
the door above the lint filter. See Figure 1.