Beko WMI 71641 Washer User Manual


 
EN
26
Detergent Drawer
Remove any powder residue build up in
thedrawer.Todothis;
1
2
3
4
1. Youcanremovethedetergentdrawer
by pulling it towards yourself strongly.
C
If more than a normal amount of
softener and liquid detergent mixture
starts to remain in the softener
compartment, the siphon must be
cleaned.
2. Wash the drawer and the siphon
with plenty of lukewarm water in a
washbasin. Wear protective gloves
or use an appropriate brush to avoid
touching the residues in the drawer
when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon is in
its original location.
The loading door and the drum
Aftereachwash:
• Checkifthereareanyforeign
substances in the drum.
• Opentheholeinthebellowwiththe
aid of a toothpick if it is clogged.
C
Foreign metal substances in your
machine can cause rust stains. In
suchcases:
Clean the drum with a stainless steel
cleaning agent. Never use steel wool
or wire wool.
Body and control panel
Whennecessary:
• Wipetheexteriorpanelsofyour
machine with soapy water or mild
detergent. Dry it with a soft cloth.
• Useonlyasoftanddampclothto
clean the control panel.
A
Never use a sponge or scrubbing
material. These will damage the
painted and plastic parts.
Inlet water filters
There is a filter at the end of each water
intake valve at the back side of the
machine and also at the end of each water
intake hose where they are connected to
the tap. These filters prevent the foreign
substances and dirt in the water to enter
into the machine. Filters should be cleaned
as they get dirty.
7
Maintenance and cleaning