Beko WMI 71641 Washer User Manual


  Open as PDF
of 48
 
EN
24
Program in rinse hold mode
•
This process is shown with the
flashing Spin Symbol and the lit up
Standby Symbol.
If you wish to spin when the machine is in
thismode:
Adjustthespinspeed.Press“Start/Pause/
Cancel”button.Theprogramcontinues,
pumps out the water and spins. The
Standby Symbol fades out and Start
Symbol lights up.
If you want to discharge the water only
withoutspinning:
Press“Start/Pause/Cancel”button.
The Standby symbol will fade. The
Start symbol will light up. The program
continues and only drains the water.
End of program
When the program is finished, the symbols
of the relevant steps will remain lit up and
the auxiliary function, spin and temperature
data selected at the start-up of the
programwillremainselected.“End”will
appear on the display.
 previous next