Beko WMI 71641 Washer User Manual


  Open as PDF
of 48
 
EN
19
Whenthe“Temperature”buttonispressed
after Cold is selected, the maximum
temperature of the program you have
selected will be displayed.
To decrease the temperature, press the
“Temperature”buttonagain.
90˚C
Normally soiled, white cottons and
linens.(Ex.:coffeetablecovers,
tablecloths,towels,bedsheets)
60˚C
Normally soiled, fade proof coloured
linens, cottons or synthetic clothes
(Ex.:shirts,nightgowns,pyjamas)
and lightly soiled white linen clothes
(Ex.:underwear)
40˚C
30˚C
Cold
Blended clothes including synthetics
and woollens as well as delicates.
Economy Symbol
Shows energy saving programs and
temperature selections.
As“Intensive”and“Hygiene”programsare
long programs with higher temperature
selectionstoensurehygiene,“Economy”
Symbol will not light up.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
“Spin”button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “
”andno
spin is shown with “
”symbols.
F2
F4
F1
F3
If you are not going to unload your clothes
immediately after the cycle, you may use
rinse hold function in order to prevent
your clothes becoming creased when
there is no water in the machine. With
this function, your laundry is kept in the
final rinsing water. If you want to spin your
laundryaftertherinseholdfunction:
- Adjust the spin speed.
- Press“Start/Pause/Cancel”button.
Programresumes.Yourmachine
drains the water and spins your
laundry.
Youcanusenospinfunctioninorderto
drain the water without spinning at the end
of the program.
 previous next