Beko WMI 71641 Washer User Manual


  Open as PDF
of 48
 
EN
22
Time delay
Withthe“Timedelay”functionyoucan
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Opentheloadingdoor,placethe
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and, if
required, select the auxiliary functions.
3. Press“Timedelaying”buttons“+”and
“-”tosetyourdesiredtimedelay.The
Time delaying symbol will flash.
4. Press“Start/Pause/Cancel”button.
Then the time delay starts to count
down. The Time delaying symbol will
light up. The Start symbol will light up.
 The“:”inthemiddleofthedisplayed
time delay will start to flash.
•
Morelaundrymaybeloadedortaken
out during the time delay period. At
the end of the time delay countdown
process, time delaying symbol fades
and the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during the
countdown:
1. Press“Start/Pause/Cancel”button.
“:“inthemiddleofthescreenwill
stop flashing. The Standby symbol will
light up. The Time delaying symbol will
flash. The Start Symbol will fade.
2. Press“Timedelaying”buttons“+”or
“-”tosetyourdesiredtimedelay.
3. Press“Start/Pause/Cancel”button.
The Time delaying symbol will light
up. The Standby symbol will fade. The
Start symbol will light up.
4. The“:”inthemiddleofthedisplayed
time delay will start to flash.
Cancelling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press“Start/Pause/Cancel”button.
The“:”inthemiddleofthedisplayed
time delay will stop flashing.
2. Start symbol will fade. The standby
symbol and the time delaying symbol
will flash.
3. Presstimedelayingbutton“-”to
decrease the desired time delay.
Programdurationafter30minutes
shall be displayed.
4. PressStart/Pause/CancelButtonto
start the program.
Starting the Program
1. PressStart/Pause/Cancelbuttonto
start the program.
2. The start symbol which indicates that
the program has started will light up.
3. The door locks and the door locked
symbol will light up.
4. The Symbol of the relevant step
(prewash,mainwash,rinse,softener
andspin)thattheprogramhasstarted
from will light up.
Progress of program
The progress of a running program is
shown through a number of symbols on
the screen.
•
At the beginning of each program
step, the relevant symbol in the series
of symbols will light up and thus, at
the end of the program, all symbols
will remain lit up. The symbol that
lights up at the far right of the series
of symbols indicates the step that is
being carried out.
Pre-wash
When“prewash”auxiliaryfunctionis
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Mainwashsymbolwilllightuptoindicate
that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of
the rinse step.
Softener
Softener symbol lights up at the beginning
of softener step.
Spin
Spin symbol will light up at the beginning
ofthefinalspin,during“Spin”and“Pump”
 previous next