Filter
Top Products
26
2. Electrical Service Specifications
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is
affixed to the right electrical control panel.
WARNING: 208 VAC and 230 VAC ARE NOT THE SAME. Any damage done to dryer
components due to improper voltage connections will automatically VOID THE
WARRANTY.
NOTE: ADC reserves the right to make any changes in specifications at any time without notice or
obligation.
310 (Gas) Non-Tilt
15 HP Blower/5 HP Drive Motor
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT: 208 VAC and 230 VAC ARE NOT THE SAME. When ordering, specify
exact voltage.
NOTES: A. Fuse ratings are dual element, time delay, current limiting, class RK1 or RK5 ONLY.
B.
Circuit breakers are thermal/magnetic (industrial) motor curve type ONLY. For others,
calculate/ verify correct breaker size according to appliance amp draw rating and type of
breaker used.
C. Circuit breakers for 3-phase (3ø) dryers must be 3-pole type.
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX.
AMP DRAW
FUSING
CIRCUIT
BREAKER
Dual Element
Time Delay
208 3ø 3/4 57 80 90
230 3ø 3 53 80 90
380 3ø 3/4 31 50 60
416 3ø 3/4 29 50 60
460/480 3ø 3/4 30 50 60