Filter
Top Products
53
IMPORTANT
MANUAL RESET HI-LIMIT INSTRUCTIONS
(PHASE 7 - STEAM MODELS ONLY)
This dryer was manufactured with a manual reset basket (tumbler)/lint chamber hi-limit thermostat. If the
manual reset thermostat is open prior to the start of the drying cycle, or during the cycle, the dryer will recognize
the open state of the hi-limit thermostat and will display a hi-limit fault. The manual reset hi-limit must be reset
manually.
This hi-temperature condition may be caused due to a restricted exhaust, poor airflow, or improper heating
unit operation.
The location of the manual reset hi-limit is in the lint chamber area.
WARNING: Discontinue power to the dryer before attempting to reset hi-limit.
IMPORTANT
This dryer is equipped with a lint
chamber hi-limit thermostat which must be
reset manually.
WARNING: Discontinue power to dryer
before attempting to reset hi-limit.
ADC P/N: 114093