Filter
Top Products
13
4.
Exhaust Transition Piece
a. Inside the tumbler (basket) of this dryer is an
Exhaust Transition Piece that must be installed
on the outlet of the exhaust before any further
venting is connected;
1) Remove the Exhaust Transition Piece from the
tumbler (basket) and place it on the exhaust
outlet.
2) Using the screws provided, secure the Exhaust
Transition Piece to the dryer.
NOTE: It is recommended that this joint be taped
as well as ALL other duct joints to
prevent moisture and lint from escaping
into the building.
WARNING
An exhaust duct transition piece is shipped inside of the dryers
tumbler and MUST be installed on the dryers
exhaust duct, with the hardware provided, BEFORE
location venting is connected to the dryer.
THIS EXHAUST DUCT TRANSITION PIECE
MUST BE INSTALLED FIRST!
Failure to observe this installation requirement may result in
damage to the dryer, create a FIRE HAZARD and will VOID
the manufacturers warranty.
012999JEV-GS/cj P/N: 114092