Filter
Top Products
SECTION VII
PROCEDURE FOR FUNCTIONAL CHECK OF
REPLACEMENT COMPONENTS
1. Microprocessor (computer) Board
a. Upon completing installation of the replacement microprocessor (computer) board, reestablish power to
the dryer.
b. Start the drying cycle.
c. Verify that the motors and the heat indicator dots, in the microprocessor (computer) L.E.D. (light emitting
diode) display are on. (Refer to the illustration below.)
d. Verify that motors, heat, and door indicator lights on the back side of the microprocessor (computer)
board are lit. (Refer to the illustration below.)
54