Alliance Laundry Systems SWD444C Washer/Dryer User Manual


 
Maintenance
41
802031
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Before You Call for Service
You may save time and money by checking the
following:
If the Washer:
If the Dryer:
Won’t
Fill
Won’t
Start
Won’t
Tumble
Won’t
Spin
Won’t
Drain
Possible Reason
Do This to Correct
Be sure power cord is plugged all the way into the electrical
outlet.
••••
Close the loading door tightly.
••••
Check the laundry room fuse or circuit breaker.
Turn on the hot and cold water faucets.
Clean the screens in the water mixing valve and the filter
screens in the fill hoses.
••
Are controls properly set?
••
Broken drive belt. Call the service person.
••
Foreign object trap clogged. Clean foreign object trap.
Press the START keypad.
Insert coin(s) or card.
Does
Not
Start
Does
Not
Heat
Does Not Dry
Clothes
Satisfactorily
Possible Reason
Do This to Correct
Insert coin(s) or card.
Be sure the cord is plugged all the way into the electrical outlet.
Close the loading door.
Make sure the controls are in a HEAT setting.
Press the START keypad.
••
Has the laundry room fuse blown or become loosened, or is a circuit breaker
OFF? The dryer itself does NOT have an electrical fuse.
Has the motor overload protector cycled? Wait 10 minutes and try again.
Clean the lint filter.
••
Check the exhaust duct to the outside to see if it is kinked, blocked or needs
cleaning.
••
Check the weather hood to make sure the flappers move freely, are not
pushed in or have not been blocked.
Is the load too small? Small loads may not tumble properly or dry evenly.