Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
M414545
53
Figure 23
REVERSING OPERATION
This tumbler is equipped with a second motor and
additional controls to reverse the direction of the cylinder
rotation. The main reason for this option is to prevent
tangling of large pieces and minimize wrinkling.
REVERSE CONTROL SWITCH
A simple “on-off” switch is placed in the control panel
area so the operator can choose reversing or nonreversing
operation. The switch is wired into the reverse control
time circuit in such a way that the cylinder will always
turn clockwise (as viewed from the front of the dryer)
when the reverse control switch is actuated for
“nonreversing” operation. If the cylinder is turning in the
wrong direction when the switch is actuated, it will
continue for a few seconds and then start up in the proper
direction.
IMPORTANT: After any electrical maintenance is
done, make sure that the blower motor is turning
clockwise as viewed from the front of the tumbler.
Then set the reverse control switch to “non-
reversing” and note that the cylinder turns constantly
clockwise as viewed from the front of the tumbler. If
not, interchange L1 and L2 power leads to the reverse
drive motor.
COOLING
DRYING
PUSH
TO
START
10
5
0
15
0
10
20
30
40
50
60
T216IE3D
DRYING
TIMER
SELECTOR
COOLING
TIMER
SELECTOR
PUSH-TO-START
BUTTON
COOLING
INDICATOR
DRYING INDICATOR