Filter
Top Products
12
F. DRIVE SHAFT ASSEMBLY
(Viewing from the front of the dryer.)
Behind front panel on the left side of the
dryer, you can view the drive shaft assembly
which consists of a 9-inch (22.86 cm) drive
pulley, two (2) 6-inch (15.24 cm) wheels,
one (1) taper lock bearings, and one (1) 1-
inch (2.54 cm) pillow block bearings.
G. IDLER SHAFT ASSEMBLY
(Viewing from the front of the dryer.)
Behind the front panel on the right side of
the dryer you will view the idler shaft
assembly which consists of one (1) 6-inch
(15.24 cm) wheels, one (1) taperlock
bearings, and two (2) 1-inch (2.54 cm)
pillow block bearings.
H. TUMBLER (BASKET)
The tumbler (basket) consists of a tumbler
(basket) which has four (4) ribs and four
(4) removable perforated panels which are
mounted to the rib sections of the tumbler
(basket) with 1/4-20 x 1/4 socket button
head screws.