176 Summit Client Configuration
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
How To: Use the Certs Path
1. Follow the instructions later in this chapter for “Downloading a Root CA Certificate to a PC”.
2. Copy the certificate to a specified directory on the mobile device. The default location for
Certs Path is \System. A different location may be specified by using the Certs Path global
variable. Please note the location chosen for certificate storage should persist after warmboot.
3. When completing the Credentials screen for the desired authentication, do not check the Use
MS store checkbox after checking the Validate server checkbox.
4. Enter the certificate name in the CA Cert textbox.
5. Click OK to exit the Credentials screen and then Commit to save the profile changes.
No Security
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Admin password and tap OK.
Tap the Config or Profile tab.
or
Figure 5-11 Configure a Summit Profile with No Security
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to None.
Set Encryption to None.
Tap the Commit
3
button to save the new profile configuration.
Perform a warm reset function to connect using the new profile configuration.
3
LXE recommends performing a Warm Reset or Suspend/Resume function after making changes to the SCU
configuration.
