Summit Client Configuration 171
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Parameter Default Function
Certs Path System A valid directory path, of up to 64 characters, where WPA
Certificate Authority and User Certificates are stored on the mobile
device. LXE suggests ensuring the directory path currently exists
before assigning the path in this parameter. See sections titled Root
Certificates and User Certificates later in this chapter for
instructions on obtaining CA and User Certificates. This value is
masked when the Admin is logged out.
Options are: none.
For example, when the valid certificate is stored as My
Computer/System/mycertificate.cer, enter System in the Certs Path
text box as the directory path.
CCX Off Use of Cisco Compatible Extensions (CCX) radio management and
AP specified maximum transmit power features.
Options are: On, Off
WMM Off Use of Wi-Fi Multimedia extensions.
Options are: On, Off
Tray Icon On Determines if the Summit icon is displayed in the System tray.
Options are: On, Off.
Aggressive
Scan
On When set to On and the current connection to an AP weakens, the
radio aggressively scans for available APs. (Not available in all
versions)
Aggressive scanning works with standard scanning (set through
Roam Trigger, Roam Delta and Roam Period). Aggressive
scanning should be set to On unless there is significant co-channel
interference due to overlapping APs on the same channel.
Options are: On, Off.
Auth
Timeout
8 sec Specifies the number of seconds the Summit software waits for an
EAP authentication request to succeed or fail. (Not available in all
versions)
If the authentication credentials are stored in the active profile and
the authentication times out, the association fails. No error message
or prompting for corrected credentials is displayed.
If the authentication credentials are not stored in the active profile
and the authentication times out, the user is again prompted to enter
the credentials.
Options are: An integer from 3 to 60.
Note: Tap the Commit button to save changes. If the panel is closed before tapping the Commit
button, changes are not saved!
